Products | Work Booths |

Double telescopic swivel arms type ACC

If space at the welding workstations is very limited, the use of double telescopic welding protection curtains of type ACC is recommended. These swivel arms can be telescoped from 3,100 mm to 1,340 mm and are used both in the entrance areas of booths and for intermediate partitions. Welding protection booths can therefore be used much more flexibly.

Advantages at a glance

Technical features:

• Function:

  • Swivelling (2 x 90°) with locking in the centre position
  • Double telescopic with locking in end positions

• Width:

  • 3,100 mm (1-wing) ⇒ telescopic to 1,340 mm

  • 6,150 mm (2-wings ⇒ telescopic to 2 x 1,340 mm (3,470 mm free)

• Welding protection curtains:

  • clear-flex welding protection strips are tested and approved in accordance with EN ISO 25980
  • Matt or smooth on both sides
  • Rounded edges, cadmium and silicone-free
  • strips overlap: 50 mm, partial overlap (33%)

• Technical features:

  • Height adjustment for horizontal alignment
  • XL solid material reinforcement in the upper area
  • Steel rollers (Ø 45 mm), ball bearing mounted, oil and dust-tight encapsulation (maintenance-free)
  • Swivelling axle with sliding guide bushes for smooth handling
  • Strips suspension with metal pendulum shells
  • Assemblies pre-assembled for easy installation
  • Galvanised or powder-coated steel parts
  • Can be attached to support type AS 105 or wall-mounted with adapter plate

Safety and easy handling combined:

• clear-flex welding protection curtains ensure safe and standard-compliant glare protection during welding processes. Harmful radiation is reliably absorbed.
• Loading at ground level. No lifting of components over welding curtains.
• Simple and ergonomic operation of the welding protection systems thanks to high-quality functional elements made of steel.
• Work accidents can be avoided thanks to easy cabin accessibility.
• Faster throughput times thanks to the user-friendliness and robustness of our modular welding booths.

Maximum flexibility:

• Advantages of the double telescopic function of the ACC swivelling arm system:
  • Small swivelling radius of 1,340 mm
  • As almost 60% of booth entrances can be opened with the telescopic function, it is often not necessary to swivel into the aisle, thus avoiding accidents and delays in factory traffic.
  • The two telescopic extensions of the ACC swivel arm can be used separately.
• When used as an intermediate partition, a large cabin can be created from 2 cabins in a very short time if required.

Relevant information for a quotation:

• Width:
  • Details as layout, sketch or type designation from the table
• Height (standard heights):
  • 2,200 mm
  • 2,240 mm
  • 2,500 mm
  • Special heights on request
• Ground clearance:
  • Individually able
  • Standard for welding booths: 100 - 500 mm
• strips type:
  • SRT (red-brown-transparent)
  • SRM (red-brown matt)
  • SGM (dark green matt)
• strips dimensions:
  • 300 x 2 mm
  • 300 x 3 mm
• Fastening:
  • Should the support structure also be offered?
  •